NC Rotary Table (0.001°)
Large Pore Size Series
- TD255P/H are equipped with high-tech Cross Roller Bearing.
- Pneumatic clamping adopted patented disk-clamping system (Taiwan PAT. : 217736 ) to enlarge clamping force and ensure heavy-duty continuous cutting (TD-255P).
- The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical e-ciency of power transmission, high indexing accuracy, and easy adjusted on the backlash.
- Driven by the servo Motor. E-ciently in position, high accuracy, Low noise and suitable for any angles working piece.
- It can be connected with CNC machine as a 4th Axis or matched with Single Axis Controller as an additional Axis.
|Use Method||Vertical/Horizontal Use or Vertical Special-Purpose|
|Clamp Method||Hydraulic 35kg/cm2|
|Spindle Through Hole Diameter||Ø80mm|
|Faceplate Centre Hole Diameter||Ø80H7mm|
|Faceplate T-Slot Width||12H7mm|
|Servo Motor||• FANUC||α8i / β12i|
|Total Speed Reduction Ratio||1/180|
|Min. Increment Unit||0.001°|
|Indexing Accuracy||15 (Arc. Sec.)|
|Repeatability||4 (Arc. Sec.)|
|Max. Torque Capacity of Worm Gear||48kgf-m|
|Max. Workpiece of Capacity||• Workpiece Vertical
|Net Weight (Without motor)||120kg|