NC Tilting Rotary Table

TTD-125P

NC Tilting Rotary Type

TTD-125P NC Tilting Rotary Type

  • Information
  • Specification
  • Dimension
  • Can do tilting angle machining.
  • The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical efficiency of Power transmission, high indexing accuracy and easy adjusted on the backlash.
  • Driven by the Servo Motor. Efficiently in position, high accuracy, low noise and suitable for any angles working piece.
  • It can be connected with CNC machine as a 5th Axis ( 5th Axis or 4+1Axis).
  • It can be connected with single axis controller to connect with CNC machine to perform tilting angel machining (4+1 Axis).
  • Minimum indexing degree: 0.001°.
  • Tilting range: ±110°.
Specifications TTD-125P
Clamp Method Pneumatic 5kg/cm2
Tilt range ± 110 °
Faceplate Dimension No
Spindle outer dia. Ø60mm
Table height at 0° position 233mm
Center height at 90° position 160mm
Center bore • Nose dia: Ø25H7x18Lmm
•Thru dia: Ø22mm
Faceplate T-Slot Width No
Position Key 14h7mm
Servo Motor
(Rotary axis)
•FANUC α2i / β2i
•MELDAS HF75T
Servo Motor
(Tilting axis)
• FANUC α4i / β8i
•MELDAS HF54T
  Rotary axis Tilting axis
Total Speed Reduction Ratio 1/90 1/90
Max. Table rotation speed
(r.p.m..motor 3,000r.p.m.)
33.3r.p.m 33.3r.p.m
Clamp torque 78N.m(8kgf/m) 157N.m(16kgf/m)
Indexing accuracy (cumulative) 45 (Arc. Sec.) 60 (Arc. Sec.)
Repeatability 4 (Arc. Sec.)
Net Weight (Without motor) 90KGS

Specifications TTD-125P
Allowable wheel torque Rotary
axis
120N.m
(12kgf/m)
Allowable work weight   156N.m
(16kgf/m)
Allowable work moment 0° : 35KGS
0-90° : 20KGS
Allowable load when table clamped F: 343N.m
(35kgf/m)
FxL: 78.4N.m
(8kgf/m)
FxL: 156N.m
(16kgf/m)
Allowable work inertia
: 0.7kgf/m2
(6.9Kg.cm.sec2)
The outline of dimension
TTD-125P Mounting Direction A B1 B2 C1 C2 C3 D E1 E2 F
Y-axis direction 560 298 227 291.6 290 255 160 576 220 Ø125
X-axis direction 650 298 227 291.6 290 255 160 421 220 Ø125
Unit: mm

The outline of dimension
TTD-125P Mounting Direction G1 G2 H1 H2 I1 I2 J K  
Y-axis direction M14 7 95 291 81 79 5 25 Ø20
X-axis direction M14 7 95 291 81 79 5 25 Ø20
Unit: mm
Spindle Dimension
Faceplate A B C D
YES Ø22 X 18L 158 Ø22 X 20L 6-M6X15L, Ø31
NO Ø25 X 18L 140 Ø22 X 205L 6-M6X15L, Ø31
Unit: mm
  • news
  • news