Company Profile

Spintop Machinery has commenced production of the NC rotary table in year 1996 in cooperation with
Industrial Technology Research Institute (ITRI) for related products and components; to begin with. With
decades of experience behind us in the eld of NC rotary table, we have developed several models of NC
rotary table and the NC Indexing Table and we have received high appreciation from the industry and
our valued customers.

In year 2005, we put our dual-axis NC rotary table (commonly known as 4-Axis, 5-Axis) in our production
program and sold products around the world and gained a remarkably good response. Five-Axis
machining has almost become a trend by then. The advanced countries have adopted Five-axis
machining in order to reduce machining time and higher process accuracy (Simultaneously multi-angle
processing) thus improving overall efficiency by installing Dual-Axis NC Rotary Table in the existing
three-axis CNC machine.

Direct Drive (DD) motor or torque motor, will be the trend in the mechanical transmission for the future.
It has advantage of high-speed, high-accuracy, no backlash etc. For this reason, in 2008, we have been
actively involved in developing the rotary table with direct drive motor for 4-axis or 5-axis CNC machine.
This research and development we could achieve with the able cooperation and support from PMC and
could able to showcase the dual-axis NC rotary table in the Taipei International Machine Tool Show 2009
(TIMTOS 2009). This NC rotary table adopted direct drive motor and encoder, procured from Europe and
integrated with Heidenhain controller. By incorporating appropriate cooling circuit it was possible to
extract the max. Torque output from the DD motor torque characteristics.

Recently in the market, NC rotary table with DD motors are incorporated with existing controller
available for the 4th-axis or 5th-axis on the machine. However, DD servomotors required high precision
control system, so it becomes essential to get incorporate the higher level of controller such as
HEIDENHAIN, Siemens, Fanuc 31iM and Mitsubishi M70 for the machine which in turn will increase the
overall costs. Due to this reason, SPINTOP developed a model of external CNC controller that could be
interfaced with the original controller or low-level CNC controller to meet the requirement of DD motor
as well keep the cost reasonably low.

This type of controller can control the DD motor to rotate any angle with mi. increment of 0.001° with the
help of midrange encoder. According to the requirement of accuracy from a customer such as ±5 sec,
±15 sec and ±30 sec we choose to use multi-angle or multi-surface processing.

Due to this the DD motor have characteristics of high speed, zero backlash and ability to adapt a normal
encoder we can offer a NC Rotary Table of stable performance with reduced fault or error. It is easy to
interface and integrate DD motor NC Rotary table with in the existing machine with the help of spare M
code available.


CONTACT US +886-4-25682975

 

 

 

History

1993~1996
  • Milling Machine Department: Specially manufacture "SPINTOP" Vertical Milling Machine. Machining
  • Department: Built high precision machinery parts in Milling Machine, C.N.C. Tooling MachineKetc., that only supply to domestic machinery manufacturers.
1996~1997
  • According on high precise work pieces marketing survey in September, pointed out the future machinery parts progression tended to C.N.C. Rotary Table. Hence, our company established a C.N.C. Rotary Table Research Department. Meanwhile, this department cooperated with Industrial Technology Research Institution of R.O.C. to develop relative products. Also, due to the quality of C.N.C. Index Table demand on accuracy and precision, therefore, a high precise 2D measuring system (TESA) had been purchased from Switzerland to solve this kind of problems.
1997
  • In January, completed research and started to produce products in Coupling Index Table Vertical type (CV3-320) and Horizontal type (CH-340). Also, developed the C.N.C. Rotary Table in diameter of 125mm (TD-125), 170mm (TD-170) and 320mm (TD-320)
  • In March, presented products to TIMTOS 1997, Taipei International Machine Tool Show.
  • In October, research department decided to use the European made PBC (Phosphor Bronze Alloy) Worm Set (Worm Wheel and Worm Shaft) instead of M.I.T. Worm Set is each model, this increased the hardness and tensile strength which overcame the teeth worn out, i.e. Lifetime extended and good quality in accuracy.
  • In November, developed Coupling Index Table with in diameter 200mm(CH2-200), 300mm(CH2-300), 450mm(CH2-450), 600mm(CH2-600) & 470mm(CH3-470)
1999
  • In March, presented products to TIMTOS 1999, Taipei International Machine Tool Show.
  • In May, use Double-Lead Worm Sets that made in England , and it is installed in TD series products. In August, start to produce TD-400, CH3-600.
2000
  • In March, completed research and started to produce in RAPC-1000 Rotary-Plate Changer, also sell to Japan .
  • In June, started to sell CV3-255.
2001
  • In January, company research and started to produce in HIC-2000 Hydraulic Index Table.
  • In March, presented products to TIMTOS 2005, Taipei International Machine Tool Show, also plan to take part in The 7th China Int., Machine Tool Show, and Thai Metalex 2001 Show, also devoted to export trade.
  • In April, company research and started to produce in smaller Faceplate Tailstock: FT-135, FT-160A
  • In May, company presented products in The 7th China Int., Machine Tool Show.
  • In September, company presented products in EMO Show.
  • In November, company presented products in Thai Metalex 2001 Show.
2002
  • In February, company research and started to produce in diameter of 500mm (TD-500).
2003
  • In January, company research & development of NC Index Table- Model NC-150.
  • In February, company research & development of NC Index Table Controller- Model SIMPLE 2003.
  • In March, presented products to TIMTOS 2003, Taipei International Machine Tool Show.
2004
  • In April, completed research & development of Hydraulic Index Table- Model CH3-800
  • In May, completed research & development of NC Rotary Table TR-125 for Laser Engraving machine.
  • In October, completed research & development of new type Index Table- Model CH2-201
2005
  • In January, completed research & development of Hydraulic / Pneumatic Index Table Controller- ModelPIC-2005
  • In February, research & development of Digital Angle Displayer - Model TRO-2005
  • In March, completed research & development of NC Tilting Rotary Table- ModelTTD-125 & TTD-255H
  • In March, presented products to TIMTOS 2005, Taipei International Machine Tool Show.
2006
  • In January, completed research & development of Multi-Spindle CNC Rotary Table (Right Side)- ModelTD-125-3R
  • In May, completed research & development of new type Hydraulic Index Table Controller- ModelHIC-2006
  • In August, completed research & development of Multi-Spindle CNC Rotary Table (Left Side)- Model TD-125-3L
  • In October, started research & development of NC Rotary Table (Left Side) - Model TD-170L.