MD-03A / MD-03AP
Automation DD Rotary Table
MD-03A / MD-03AP
Vertical use
  • DD Servo Motor, No backlash.
  • High Speed, 90-degree division time less than 1 second.
  • It can be used with any controller and specialized for processing indexing manufacture.
  • Min. indexing degree: 0.001 degrees.
  • High repeatability.
  • The installation of the encoder is dependent upon its accuracy requirement.
Popular Model
Specification  MD-03A-NNK5 MD-03AP-NNK5
Use Method Vertical use
Cooling NO
Clamp method No Brake Pneumatic 5 kg/cm2
Faceplate dimension No faceplate
Spindle Through Hole Diameter NO
Spindle nose diameter diameter Ø40x11L mm
Center height 80mm
Maximum Speed (1 sec.) 300rpm
Continuous Speed 100rpm
Maximum Current(1 sec.) 8.58A
Cont.Current 2.86A
Maximum torque(1 sec.) 18.6Nm
Cont.torque 6.2Nm
Minimum Increment 0.001°
Encoder Type Absolute (NIKON)
Resolution 24bit
Positioning accuracy angle compensation by controller
Repeatability within10 Arc.Sec.
Clamping Force NO 13kgf-m
Net weight 17kg
Max. Workpiece load capacity
W:10kg
D:125mm
L:200mm

Remark: W, D, L three conditions, one of which is satisfied is the maximum load.

Standard Accessories:
Connectors (for power and encoder)
Optional accessories:
  • Rotary table to driver power cable - 5 meters
  • Rotary table to driver encoder cable-5 meters
customer machine requirements:
  • 400W driver (NIKON encoder signal is readable)
  • Pure pneumatic source 4-6 kg/cm2
  • Single Coil Pneumatic Solenoid (DC24V)
  • Pneumatic Pressure Switch
unit: mm
Faceplate Total width(A) Total thickness(B) Total height(C) Center height(D) Spindle through hole(K) Spindle or plate outer diameter(H) Key(E) Pitch -Diameter(M)
MD-03A No faceplate 220 196 166.5 80 NO Ø80 14 200-8.5
MD-03AP No faceplate 220 215.2 166.5 80 NO Ø80 14 200-8.5