Manual Tilting NC Rotary Table(0.001°)


Manual Tilting NC Rotary table

TDM-170P Manual Tilting NC Rotary table

  • Information
  • Specification
  • Dimension
  • Accessory
  • Enhanced highest clamping force, more suitable for heavy cutting.。
  • Tilting angle rotated by hand, rotary table controls by NC Controller.
  • Can do any angle machining.
  • Tilt Axis can be extra installed Digital Angle Display TRO-2005, resolution 0.02 degrees.
Specifications TDM-170P
Clamp Method Pneumatic 5kg/cm2
Faceplate Dimension Ø170mm
Spindle Through Hole Diameter Ø45mm
Faceplate Centre Hole Diameter Ø50H7mm
Centre Height 170mm
Faceplate T-Slot Width 12H7mm
Position Key 18h7mm
Servo Motor
Rotary Axis Tilting Axis
• FANUC α4i / β8i Manual
Total Speed Reduction Ratio 1/90 1/72
Min. Increment Unit 0.001°
Indexing Accuracy 30 (Arc. Sec.)
Repeatability 4 (Arc. Sec.)
Clamp Force 16kgf/m
Max. Torque Capacity of Worm Gear 27kgf/m
Tilting Range 0°~105°
Max. Workpiece of Capacity • Workpiece Vertical
(With Tailstock)
• Horizontal 150KGS
Tool Clamp Device BT40
Net Weight (Without motor) 90KGS

    Digital Angle Display TRO-2005

  • Tilting Axis can be attached with Digital Angle Display.
  • Resolution : 0.02 degree.

    BT40 Tool Clamp Device

  • Able to attach BT40 collet Chuck with fixyure and perform auick too-change.
  • Grip / Change work piece fast and easy.
  • Excellently suit for tool machining.
  • news
  • news