Direct Drive CNC Grinding Machine Module

DGH-100AB5

DD Rotating Spindle for grinding machine (A-axis)

DGH-100AB5 DD Rotating Spindle for grinding machine (A-axis)

  • Information
  • Specification
  • Dimension
  • DD Motor Drive, No backlash.
  • High Speed, 90-degree division time less than 1 second.
  • Can be used with any controller and specialized for processing indexing manufacture.
  • Min. indexing degree: 0.001 degree.
  • The installation of encoder is dependent upon its accuracy requirement.
Specifications DGH-100AB5
Use Method Vertical use
Cooling Circuit Reserve no / yes
Clamp Method -
Faceplate Dimension -
Spindle through hole diameter φ30 mm
Faceplate Centre Hole Diameter BT-50
Centre Height 135 mm
Solenoid & Detection Need to be connected
Max. Speed 200 rpm
continuous r.p.m 75 rpm
Max. Rated current (1sec) 9A / 12A
Cont. Rated current 3A / 6A
Max. Rated torque (1sec) 114Nm / 228Nm
Cont. Rated torque 38Nm / 76Nm
Min. Increment Unit 0.001°
Clamp Force -
Net Weight (Without motor)  70 kgs
  • 1. The cooling machine is provided by the customer.
    2. When rotary spindle match with rotary table, the connection plate should be prepared by customer.

Encoder Specification:

Specifications code Label Communication protocol Resolution Indexing Accuracy Repeatability
NNK3 NIKON NIKON Serial abs interface 22bit ±20 (Arc. Sec.) Within 15 Arc.Sec.
HE12 Heidenhain Heidenhain Serial Interface, EnDAT 2.2/22 25bit ±25 (Arc. Sec.) Within 10 Arc.Sec.
  • news
  • news