DD Rotary Table


Vertical Use

EDD-170BP DD Rotary Table for Vertical Use

  • Information
  • Specification
  • Dimension
  • DD Motor Drive, No backlash.
  • High Speed, 90-degree division time less than 1 second.
  • It can be used with any controller and specialized for processing indexing manufacture.
  • Min. indexing degree: 0.001 degrees.
  • High repeatability.
  • The installation of the encoder is dependent upon its accuracy requirement.
Specifications EDD-170BP
Use Method  Vertical use
Cooling Circuit Reserve
Cooling Type Natural cooling
Clamp Method Pneumatic 5 kg/cm2
Faceplate Dimension
Applicable Panel Ø170 mm (Optional)
Spindle through hole diameter
Centre Height 135 mm
 Solenoid & Detection Need to be connected
 Encoder format Heidenhain Serial Interface  ,
EnDAT 2.2/22  25bit
Fanuc Serial Interface ,
Fanuc05  25bit
Mitsubish Serial Interface,
Mit03-4  25bit
NIKON Serial abs interface  24bit
Max. Speed 200 rpm
continuous r.p.m 75 rpm
Max. Rated current (1sec) 15 A
Cont. Rated current 3 A
Max. Rated torque  (1sec) 190 Nm
Cont. Rated torque  38 Nm
Min. Increment Unit 0.001°
Indexing Accuracy ±20 Arc.Sec.
Repeatability Within 10 Arc.Sec.
Clamp Force 15 kgf/m
Net Weight (Without motor) 38 kgs

Specifications Value
Max Capacity of Workpiece
(with tailstock)

Eccentric Load


Balance Load

Max. Workpiece load capacity
(without tailstock)

※ Rotating Speed 90°/Sec( not including clamp/unclamp time 0.5 sec)
※ When D becomes bigger and bigger, the W will be smaller and smaller.

  • news
  • news