DD Rotary Table


Horizontal Use

DH3-340C DD Motor Rotary Table for Horizontal Use

  • Information
  • Specification
  • Dimension
  • DD Motor Drive, No backlash.
  • High Speed, 90-degree division time less than 1 second.
  • It can be used with any controller and specialized for processing indexing manufacture.
  • Min. indexing degree: 5 or 15 degrees.
  • High repeatability.
  • Can match the Circular faceplate, to be a ROTARY INDEXING SPM.
  • Can match the Square faceplate, to be an indexing table of horizontal machining machine.
  • It's also can be an APC of moving column machine.
Specifications DH3-340C
Use Method Horizontal use
Cooling Circuit Reserve yes
Cooling Type Natural cooling Liquid cooling
Clamp Method Pneumatic 5 kg/cm2
Hydraulic 35Kg/cm2
Faceplate Dimension Ø340mm
Spindle through hole diameter
Centre Hole Dia Ø50x15L mm
T-Slot Width
Total Height 270 mm
 Solenoid & Detection Need to be connected
    Encoder format Tamakawa Smart ABS 17bit
Hi Speed 150 rpm
continuous r.p.m 75 rpm
Max. Rated current (1sec) 15 A
Cont. Rated current 3 A 6 A
Max. Rated torque  (1sec) 225 Nm
Cont. Rated torque  75 Nm 150 Nm
Min. Increment Unit 15°
(by controller setting)
special:5、9、10、16, etc
Indexing Accuracy ±20 Arc.Sec.
±5 Arc.Sec.
Repeatability ±5 Arc.Sec.
±2 Arc.Sec.
Clamp Force 160kgf/m(1600N)
Net Weight (Without motor) 159 KGS
  • news
  • news