NC Tilting Rotary Table

TTD-255H

NC Tilting Rotary Type

TTD-255H NC Tilting Rotary Type

  • Information
  • Specification
  • Dimension
  • Adopting Hydraulic Swelling Surrounding Clamping System, to enlarge clamping force (about other models' 1.2-1.4 times), and ensure heavy-duty continuous cutting.
  • Can do tilting angle machining.
  • The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical efficiency of Power transmission, high indexing accuracy and easy adjusted on the backlash.
  • Driven by the Servo Motor. Efficiently in position, high accuracy, low noise and suitable for any angles working piece.
  • It can be connected with CNC machine as a 5th Axis ( 5th Axis or 4+1Axis).
  • It can be connected with single axis controller to connect with CNC machine to perform tilting angel machining (4+1 Axis).
  • Minimum indexing degree: 0.001°.
  • Tilting range: ±110°.
Specifications TTD-255H
Clamp Method Hydraulic 35kg/cm2
Tilt range ± 110 °
Faceplate Dimension Ø255mm
Spindle outer dia. No
Table height at 0° position 334.5mm
Center height at 90° position 220mm
Center bore • Nose dia: Ø30H7x20Lmm
• Thru dia: Ø30mm
Faceplate T-Slot Width 12h7mm
Position Key 18h7mm
Servo Motor
(Rotary axis)
•FANUC α8i / β12i
•MELDAS HF104T / HF154T
Servo Motor
(Tilting axis)
• FANUC α8i / β12i
•MELDAS HF104T / HF154T
  Rotary axis Tilting axis
Total Speed Reduction Ratio 1/120 1/180
Max. Table rotation speed
(r.p.m..motor 3,000r.p.m.)
25r.p.m 16.7r.p.m
Clamp torque 588N.m(60kgf/m) 686N.m(70kgf/m)
Indexing accuracy (cumulative) 15 (Arc. Sec.) 45 (Arc. Sec.)
Repeatability 4 (Arc. Sec.)
Net Weight (Without motor) 330KGS

Specifications TTD-255H
Allowable wheel torque Rotary
axis
490N.m
(50kgf/m)
Allowable work weight   470N.m
(48kgf/m)
Allowable work moment 0° : 120KGS
0-90° : 70KGS
Allowable load when table clamped F: 1170N.m
(120kgf/m)
FxL: 470N.m
(48kgf/m)
FxL: 470N.m
(48kgf/m)
Allowable work inertia
: 0.7kgf/m2
(6.9Kg.cm.sec2)
The outline of dimension
TTD-255H Mounting Direction A B1 B2 C1 C2 C3 D E1 E2 F
Y-axis direction 836 446 337 370 422 334.5 220 715 290 Ø255
X-axis direction 1042 446 609 370 422 334.5 220 473 290 Ø255
Unit: mm

The outline of dimension
TTD-255H Mounting Direction G1 G2 H1 H2 I1 I2 J K  
Y-axis direction M18 7 114.5 255 156 135 30.5 25 Ø30
X-axis direction M18 7 114.5 313 156 135 30.5 25 Ø30
Unit: mm
Spindle Dimension
Faceplate A B C D
YES Ø30 X 20L 171 Ø30 X 20L 4-M6X15L, Ø41
Unit: mm
  • news
  • news