TE-800H

Large Pore Size Series

TE-800H Large Pore Size Series NC Rotary Table (0.001° )

  • Information
  • Specification
  • Dimension
  • Adopted patented disk hydraulic clamping system . It can assure heavy and steady cutting without any deviation from the centre (TE-800).
  • The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical e-ciency of power transmission, high indexing accuracy, and easy adjusted on the backlash.
  • Driven by the servo Motor. E-ciently in position, high accuracy, Low noise and suitable for any angles working piece.
  • It can be added with air booster or hydraulic unit.
  • It can be connected with CNC machine as a 4th Axis or matched with Single Axis Controller as an additional Axis.
Specifications TE-800H
Use Method Vertical / Horizontal Use
Clamp Method Hydraulic 35kg/cm2
Faceplate Dimension Ø800mm
Spindle Through Hole Diameter Ø400mm
Faceplate Centre Hole Diameter Ø400H7mm
Centre Height 430mm
Faceplate T-Slot Width 18H7mm
Position Key 18H7mm
Servo Motor • FANUC α12i
•MELDAS HF204S
Total Speed Reduction Ratio 1/180
Min. Increment Unit 0.001°
Indexing Accuracy 20 (Arc. Sec.)
Repeatability 4 (Arc. Sec.)
Clamp Force 700kgf/m
Max. Torque Capacity of Worm Gear 800kgf/m
Max. Workpiece of Capacity • Workpiece Vertical
(With Tailstock )
600(1500)KGS
• Horizontal 1500KGS
Net Weight (Without motor) 950KGS
The outline of dimension
TE-800H Servomotor
cover type
A B1 B2C1 C2 D E1 E2 F G1 G2
Vertical / Horizontal Use 1061 639 422 792.6 853 430 426.8 268 Ø800 M18 7
Unit: mm
Spindle Dimension
Faceplate A B C D
Yes Ø400 X 92L 317 Ø400 X 92L 12-M5X15L,Ø425
Unit: mm
  • news
  • news