NC Rotary Table (0.001° )

TDE-255H

Standard Series

TDE-255H Standard Series NC Rotary Table (0.001° )
  • Information
  • Specification
  • Dimension
  • Hydraulic clamping adopted wholly circular hydraulic clamping system .It can assure heavy and steady cutting without any deviation from the centre (TDE-255H、TD-255H~320).
  • The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical e-ciency of power transmission, high indexing accuracy, and easy adjusted on the backlash.
  • Driven by the servo Motor. E-ciently in position, high accuracy, Low noise and suitable for any angles working piece.
  • It can be added with air booster or hydraulic unit.
  • It can be connected with CNC machine as a 4th Axis or matched with Single Axis Controller as an additional Axis.
Specifications TDE-255H
Use Method Vertical/Horizontal Use or Vertical Special-Purpose
Clamp Method Pneumatic 35kg/cm2
Faceplate Dimension Ø255mm
Spindle Through Hole Diameter Ø45mm
Faceplate Centre Hole Diameter Ø80H7mm
Centre Height 160mm
Faceplate T-Slot Width 12H7mm
Position Key 18h7mm
Servo Motor • FANUC α8i / β12i
•MELDAS HF104T/HF154T
Total Speed Reduction Ratio 1/90
Min. Increment Unit 0.001°
Indexing Accuracy 15 (Arc. Sec.)
Repeatability 4 (Arc. Sec.)
Clamp Force 50kgf/m
Max. Torque Capacity of Worm Gear 48kgf/m
Max. Workpiece of Capacity • Workpiece Vertical
(With Tailstock)
100(250)KGS
• Horizontal 250KGS
Net Weight (Without motor) 95KGS
The outline of dimension
TDE-255H Servomotor cover type A B1 B2C1 C2 D E1 E2 F G1 G2
Vertical Special-Purpose 471 314 157 359 301 160 283 165 Ø255 M18 7
Vertical & Horizontal Use 559 402 157 359 301 160 171 165
Unit: mm
Spindle Dimension
Faceplate A B C D
Yes Ø80 X 15L 163.5 Ø45 X 20L 4-M6X10L,Ø55
Unit: mm
  • news
  • news