NC Rotary Table (0.001° )

TDE-125P

Standard Series

TDE-125P Standard Series NC Rotary Table (0.001° )

  • Information
  • Specification
  • Dimension
  • Adopted high-tech Cross Roller Bearing.
  • Pneumatic clamping adopted patented disk-clamping system (Taiwan PAT. : 217736 ) to enlarge clamping force and ensure heavy-duty continuous cutting.
  • The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical e-ciency of power transmission, high indexing accuracy, and easy adjusted on the backlash.
  • Driven by the servo Motor. E-ciently in position, high accuracy, Low noise and suitable for any angles working piece.
  • It can be connected with CNC machine as a 4th Axis or matched with Single Axis Controller as an additional Axis.
Specifications TDE-125P
Use Method Vertical/Horizontal Use
Clamp Method Pneumatic 5kg/cm2
Faceplate Dimension Ø125mm
Spindle Through Hole Diameter Ø15mm
Faceplate Centre Hole Diameter Ø20H7mm
Centre Height 110mm
Faceplate T-Slot Width 12H7mm
Position Key 14h7mm
Servo Motor • FANUC α2i / β2i
•MELDAS HF44S/HF105S
Total Speed Reduction Ratio 1/48
Min. Increment Unit 0.001°
Indexing Accuracy 45 (Arc. Sec.)
Repeatability 4 (Arc. Sec.)
Clamp Force 8kgf/m
Max. Torque Capacity of Worm Gear 15kgf/m
Max. Workpiece of Capacity • Workpiece Vertical
(With Tailstock)
50(100)KGS
• Horizontal 100KGS
Net Weight (Without motor) 25KGS
The outline of dimension
TDE-125 Servomotor cover type A B1B1C1 C2 D E1 E2 F G1 G2
Vertical / Horizontal use 381 295 86 244 175 110 151.5 132 Ø125 M14 7
Unit: mm
Spindle Dimension
Faceplate A B C D
Yes Ø22 X 22L 151 Ø15 X 20L 4-M4X12L,Ø23.5
No Ø25 X 25L 129 Ø15 X 20L 4-M4X12L,Ø23.5
Unit: mm
  • news
  • news