NC Rotary Table (0.001° )

TD-630H

Large Pore Size Series

TD-630H Large Pore Size Series NC Rotary Table (0.001° )
  • Information
  • Specification
  • Dimension
  • Adopted patented disk hydraulic clamping system . It can assure heavy and steady cutting without any deviation from the centre (TD-400~630).
  • The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical e-ciency of power transmission, high indexing accuracy, and easy adjusted on the backlash.
  • Driven by the servo Motor. E-ciently in position, high accuracy, Low noise and suitable for any angles working piece.
  • It can be added with air booster or hydraulic unit.
  • It can be connected with CNC machine as a 4th Axis or matched with Single Axis Controller as an additional Axis.
Specifications TD-630H
Use Method Vertical/Horizontal Use
Clamp Method Hydraulic 35kg/cm2
Faceplate Dimension Ø630mm
Spindle Through Hole Diameter Ø110mm
Faceplate Centre Hole Diameter Ø110H7mm
Centre Height 400mm
Faceplate T-Slot Width 18H7mm
Position Key 18h7mm
Servo Motor • FANUC α12i
•MELDAS HF204S
Total Speed Reduction Ratio 1/180
Min. Increment Unit 0.001°
Indexing Accuracy 15 (Arc. Sec.)
Repeatability 4 (Arc. Sec.)
Clamp Force 450kgf/m
Max. Torque Capacity of Worm Gear 450kgf/m
Max. Workpiece of Capacity • Workpiece Vertical
(With Tailstock)
400(800)KGS
• Horizontal 800KGS
Net Weight (Without motor) 725KGS
The outline of dimension
TD-630 Servomotor cover type A B1 B2C1 C2 D E1 E2 F G1 G2
Vertical / Horizontal Use 845 507 315 715 715 400 325 278 Ø630 M18 7
Unit: mm
Spindle Dimension
Faceplate A B C D
Yes Ø110 X 45L 186 Ø110 X 37.5L -
Unit: mm
  • news
  • news