NC Rotary Table (0.001° )

TD-500H

Standard Series

TD-500H Standard Series NC Rotary Table (0.001° )
  • Information
  • Specification
  • Dimension
  • Adopted patented disk hydraulic clamping system . It can assure heavy and steady cutting without any deviation from the centre (TD-400~630).
  • The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical e-ciency of power transmission, high indexing accuracy, and easy adjusted on the backlash.
  • Driven by the servo Motor. E-ciently in position, high accuracy, Low noise and suitable for any angles working piece.
  • It can be added with air booster or hydraulic unit.
  • It can be connected with CNC machine as a 4th Axis or matched with Single Axis Controller as an additional Axis.
Specifications TD-500H
Use Method Vertical/Horizontal use
Clamp Method Hydraulic 35kg/cm2
Faceplate Dimension Ø500mm
Spindle Through Hole Diameter Ø50mm
Faceplate Centre Hole Diameter Ø50H7mm
Centre Height 310mm
Faceplate T-Slot Width 18H7mm
Position Key 18h7mm
Servo Motor • FANUC α12i
•MELDAS HF204S
Total Speed Reduction Ratio 1/180
Min. Increment Unit 0.001°
Indexing Accuracy 15 (Arc. Sec.)
Repeatability 4 (Arc. Sec.)
Clamp Force 250kgf/m
Max. Torque Capacity of Worm Gear 250kgf/m
Max. Workpiece of Capacity • Workpiece Vertical
(With Tailstock)
250(600)KGS
• Horizontal 600KGS
Net Weight (Without motor) 470KGS
The outline of dimension
TD-500 Servomotor cover type A B1 B2C1 C2 D E1 E2 F G1 G2
Vertical / Horizontal Use 885 605 260 565 565 310 308 295 Ø500 M18 7
Unit: mm
Spindle Dimension
Faceplate A B C D
Yes Ø50 X 31L 262 Ø50 X 30L 8-M6X15L,Ø76.2
Unit: mm
  • news
  • news