NC Rotary Table (0.001° )

TD-320H

Standard Series

TD-320H Standard Series NC Rotary Table (0.001° )
  • Information
  • Specification
  • Dimension
  • Hydraulic clamping adopted wholly circular hydraulic clamping system .It can assure heavy and steady cutting without any deviation from the centre (TDE-255H、TD-255H~320).
  • The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical e-ciency of power transmission, high indexing accuracy, and easy adjusted on the backlash.
  • Driven by the servo Motor. E-ciently in position, high accuracy, Low noise and suitable for any angles working piece.
  • It can be added with air booster or hydraulic unit.
  • It can be connected with CNC machine as a 4th Axis or matched with Single Axis Controller as an additional Axis.
Specifications TD-320H
Use Method Vertical/Horizontal Use or Vertical Special-Purpose
Clamp Method Hydraulic 35kg/cm2
Faceplate Dimension Ø320mm
Spindle Through Hole Diameter Ø40mm
Faceplate Centre Hole Diameter Ø40H7mm
Centre Height 210mm
Faceplate T-Slot Width 14H7mm
Position Key 18h7mm
Servo Motor • FANUC α12i
•MELDAS HF204S
Total Speed Reduction Ratio 1/180
Min. Increment Unit 0.001°
Indexing Accuracy 15 (Arc. Sec.)
Repeatability 4 (Arc. Sec.)
Clamp Force 85kgf/m
Max. Torque Capacity of Worm Gear 78kgf/m
Max. Workpiece of Capacity • Workpiece Vertical
(With Tailstock)
150(350)KGS
• Horizontal 350KGS
Net Weight (Without motor) 170KGS
The outline of dimension
TD-320 Servomotor cover type A B1 B2 C1 C2 D E1 E2 F G1 G2
Vertical Special-Purpose 614 409 185 386.6 380 210 322 215 Ø320 M18 7
Vertical / Horizontal Use 707 502 185 386.6 380 210 223 215
Unit: mm
Spindle Dimension
Faceplate A B C D
Yes Ø40 X 35L 191 Ø50 X 30L 8-M6X15L,Ø68
Unit: mm
  • news
  • news